Device setup

Insert the USB port of the air conditioner 

 Wait for the AC-wifi network to appear 

 Connect to it with the password slwf01pro 

 Go from the browser to the address http://192.168.4.1 

 In the menu, select the home WiFi network 

 Enter the password and connect. 

 Home Assistant will see the device automatically and prompt you to add it 

 

 Optionally, you can solder a FOLLOW ME pad to use additional functionality that is only available via IR: 

 Don't forget to turn off the AC power before doing soldering! 

 FOLLOW ME pad location 

 

 Soldering location