# Note about device disassembling

Use a **thin** and **sharp** tool for opening the device cover. Insert it into the center of the terminal connector as shown in the photo below:

[![image.png](https://smlight.tech/support/manuals/uploads/images/gallery/2025-09/scaled-1680-/Jriimage.png)](https://smlight.tech/support/manuals/uploads/images/gallery/2025-09/Jriimage.png)

Once the tool is inserted, start pulling the PCB down from the Type-C connector side:

[![image.png](https://smlight.tech/support/manuals/uploads/images/gallery/2025-09/scaled-1680-/iNcimage.png)](https://smlight.tech/support/manuals/uploads/images/gallery/2025-09/iNcimage.png)