🧰 Manual for Testers: Setting Up Z-Wave JS UI in Home Assistant Z-Wave JS UIĀ is a powerful Z-Wave Home Assistant integration with a full web interface for network management. It's ideal for advanced users who want full control. Purposes of each component: Z-Wave JS UI addon - this addon manages Z-Wave network from Home Assisntant. Z-Wave Integration - Z-Wave device management app. It uses add-on as intermediary part for communication between Home Assistant and Z-Wave devices. 1ļøāƒ£ Install the Z-Wave JS UI Add-on šŸ“¦ Step 1: Add the Add-on Repository Go toĀ Settings → Add-onsĀ in Home Assistant. ClickĀ ā€œAdd-on Storeā€. Click theĀ menu (ā‹®)Ā in the top right → Repositories. Paste the repository URL:Ā  https://github.com/hassio-addons/addon-zwave-js-ui ClickĀ Add, then close the dialog. 🧪 Step 2: Install Z-Wave JS UI LocateĀ Z-Wave JS UIĀ in the Add-on Store. Click it → PressĀ Install. Wait for installation to complete. Ā  2ļøāƒ£ Configure the Add-on šŸ› ļø Step 3: Basic Settings Enable (optional)Ā Start on boot Enable (optional)Ā Watchdog EnableĀ Show on sidebar ClickĀ  Start šŸ”Œ Step 4: Set the Serial Port and Z-Wave settings After Starting, openĀ Z-Wave JSĀ tab in the left menu. Click on Setting button. Go to Z-Wave list of setting, Enable, enter Seiral port based on templateĀ  tcp://IP-ADDRESS:port, generate keys and click Save. Go to Z-Wave JS UI dashboard and check that Z-Wave controller was activated.