Tailscale set-up

Tailscale on SMHUB (Quick Setup Guide)

Applies to all SMHUB models: Professional, Essential, Nano Mg24

Tested with:

• SMHUB-OS v0.3.10

• smhub-services v0.2.7

• smhub-web v0.2.23

• Tailscale app v1.78.1-2

1. Install Tailscale

• Open Apps

• Install the Tailscale app

2. Start Tailscale (Optional: Enable Autostart)

• Go to Apps → Tailscale

• Click Run

• (Optional) Enable Start on boot if you want Tailscale to start automatically after reboot

3. Authenticate Device

In Console, run: sudo /opt/bin/tailscale up

The system will print a login URL (for example): https://login.tailscale.com/a/xxxxxx

Open the link in your browser and authorize the device.

4. Connect Another Device

• Install Tailscale on your PC

• Log in with the same account

• Authorize the device

Once both devices are in the same tailnet, they can communicate securely.

Notes

• Authentication is interactive (browser required)

• After authorization, the terminal is no longer needed

• Tailscale reconnects automatically on reboot

• No port forwarding or firewall changes required