Skip to main content
SMHUB Nano Mg24 — now shipping worldwideNew: SLWF-11 — our new compact WLED controller · see the datasheet →
SMLIGHT
PART · PoE Extender 1-to-2PoE splitter · one input, two powered outputs · SMLIGHT2026·09
PoE splitter · 1-to-2

PoE Extender.
One cable in. Two powered out.

Turn a single Power-over-Ethernet run into two — carrying both power and data — so one switch port feeds two devices, or reaches 100 m further down the line. Passive, fanless, plug-and-play, and standards-compliant. Available in 100 Mb and 1 Gb.

SMLIGHT PoE Extender 1-to-2 retail box
802.3af/at · 30 W max100 m extension
01 · Gallery

A closer look.

02 photos
Tap to enlarge
02

Why it’s handy.

One port
Two jobs
Split
Two devices, one switch port
Feed two PoE devices — a pair of SLZB coordinators, a camera and an access point — from a single powered port. No second injector, no second run.
Reach
Go the extra 100 metres
Chain it inline to carry PoE another 100 m past the usual limit, so a far-flung camera or coordinator still gets power and data over one cable.
Passive
Nothing to plug in, nothing to break
Entirely passive and fanless — no external power supply, no moving parts. It just sits in line and works.
Standard
Plays by the rules
IEEE 802.3af/at compliant with automatic negotiation, so it drops straight into standard PoE networks alongside your existing gear.
03

The specifics.

Two speeds
Same idea
PoE Extender 1-to-2
Topology1× PoE input → 2× PoE output
StandardsIEEE 802.3af / 802.3at · auto-negotiation
Power30 W max input · passive pass-through
Link speed100 Mb or 1 Gb (1000 Mb) variant
ExtensionUp to 100 m additional reach
DesignFanless · passive · no external supply
Two variants: 100 Mb and 1 Gb (1000 Mb). Pick the speed to match the devices on the line.
04

Quick questions.

Straight answers
No footnotes
Q-01
Does it need its own power supply?
No. It’s passive — it takes power from the incoming PoE line and passes it through to both outputs. Nothing else to plug in.
Q-02
Will it power any PoE device?
Any IEEE 802.3af/at device, within the shared power budget of the incoming line. It’s a natural fit for SLZB coordinators, IP cameras, access points and VoIP phones.
Q-03
What’s the difference between the 100 Mb and 1 Gb versions?
Link speed only. Choose 1 Gb if the devices and switch on that segment are gigabit; 100 Mb is plenty for coordinators, cameras and phones.
Q-04
How much extra distance do I get?
Up to another 100 m of combined power and data over Cat5e or better — handy for reaching a device just past the standard limit.
05

In the box.

What's inside
Retail box
  • PoE Extender 1-to-2
  • Quick-start guide
06

Where to get it.

Worldwide
Distributor network

The PoE Extender ships worldwide through our distributor network in 100 Mb and 1 Gb versions. Buying for a business or in volume? Our sales team is one email away.

Where to buy →Email sales
PoE Extender 1-to-2 · PoE splitter · one input, two powered outputs · SMLIGHT · 2026·09smlight.tech/products/poe-extender · SMLIGHT