OS v1.0.0 TL released on 20260710 The official, stable release of SMHUB OS v1.0.0 is finally here...

Please note!Currently, the BLE proxy for SMLIGHT SLZB integration is under development and BLE pr...

📦 v3.3.3.dev7 - Release Notes Improvements Improved firmware rollback mechanics after OTA upd...

Your SMHUB can be updated or restored in three different ways: OTA (recommended) – simple up...

💾 SD-Card Installation Guide NoticeThe direct SD-card installation method is temporarily unavaila...

Flashing over Type-C SMHUB Flasher Starting with SMHUB OS v1.0.0.dev4, you can use the SMHUB Fl...

Thread setup for Home Assistant: two options SLZB devices support two ways to run a Thread netwo...

4. About Zigbee Hub mode It is highly recommended to use U series coordinators for this mode (SL...

Zigbee Hub mode has the ability to connect to local or remote MQTT brokers. Currently only TCP ...

Prerequisites 1. Coordinator You will need coordinator with EFR32 radio module from Silicon Lab...