Recently Updated Pages

WHAT IS VPN WIREGUARD This is a feature of SLZB-OS that allow them to connect to remote Home A...

Prerequisites A server with Home Assistant installed and running. In this manual, we are using...

Microphone addon Z-Wave, POE, 4G/LTE

🚀 SLZB-OS v3.2.4 - Release Notes The latest version of SLZB-OS (v3.2.4) brings improvements to M...

General information This feature is supported only by "U" series devices and SLZB-Ultima(CPU mod...

Addon setup Flash the Thread firmware. Please follow this manual for device update instruction...

EFR32 IEEE Address change  Minimum firmware requirements for this change: smhub-os: 0.3.11 (p...

General information The SLZB-OS operating system has several API channels: HTTP, SSE and MQTT. ...

SLZB ESPHome Firmware Flashing Guide for SLZB-Ultima, MRxU and 06xU Open SLZB-ESPHome reposi...

How to open device Prepare a flat, thin tool. This can be a small screwdriver. Insert the tool ...

Flashing over Type-C 🎥 Video Walkthrough Introduction Before you begin, we highly recommend wat...

This guide explains how to run an OpenThread Border Router (OTBR) on SMHUB and connect it to Home...

2026-Jan-22: smhub-services 0.2.8-1, openthread 0.3.1-2, OS 0.3.11 Released 🚀 Key Highlight ...

The SMHUB Early Adopter Version is the first public release of our multi-radio smart hub. It’s de...

👉 Download the firmware ZIP from your usual link (latest): SD-CARD RESTORE FIRMWARE: latest os_v...

This section lists common issues that may occur during the installation or operation of SMHUB and...

Tailscale on SMHUB (Quick Setup Guide) Applies to all SMHUB models: Professional, Essential, Nan...

This guide explains how to connect any SMHUB Series device to Home Assistant using Zigbee2MQTT. ...

The following guide explains how to enable Thread networking on your SMLIGHT SMHUB device.This pr...

This section explains how to connect the SLWF-09 controller, add-on modules, and LED strips safel...