Recently Updated Pages

This section lists common issues that may occur during the installation or operation of SMHUB and...

Tailscale on SMHUB (Quick Setup Guide) Applies to all SMHUB models: Professional, Essential, Nan...

This guide explains how to connect any SMHUB Series device to Home Assistant using Zigbee2MQTT. ...

The following guide explains how to enable Thread networking on your SMLIGHT SMHUB device.This pr...

SMLIGHT develops cutting-edge smart home and IoT hardware, including Zigbee, Matter, and multi-ra...

The company is developing its own Linux-based platform for smart hubs and IoT devices SMHUB-OS - ...

1. About SLZB-OS 1.1 Overview SLZB-OS is the official firmware platform developed by SMLIGH...

The SLWF-09 comes pre-flashed with the latest stable WLED firmware, allowing you to start con...

🧭 How to Access SMHUB via SSH (Using PuTTY) ⚙️ This guide helps you connect to your SMHUB devi...

General information: USB stick in Zigbee router mode expands your existing Zigbee network: ...

SMHUB integrates multiple radios to support a broad range of smart home and IoT protocols, making...

This section explains how to unbox, power, and access your SMHUB for the first time. 3.1 Unbox...

Update using the web tool SLZB-07/MGx: Go to https://smlight.tech/flasher/ Press Update SLZB...

The table below lists all ESP32 GPIOs used by the SLWF-09, their assigned functions, and the type...

Use a thin and sharp tool for opening the device cover. Insert it into the center of the terminal...

Prerequisites: SLZB-07x Zigbee USB coordinator. Computer or Raspberry Pi where Zigbee2MQTT or...

SMHUB is a Linux-based modular hub designed to unify connectivity, automation, and control across...

Ambilight – Integrated RGB LED ring used for status indication and visual effects. Apps – Modula...

SMHUB is designed to be modular. The main board provides essential radios, networking, and I/O, w...

The SMHUB web interface is the primary way to configure and manage the system. It provides access...