Recently Updated Pages

📦 v3.3.8.dev7 - Release Notes New features New Berry modules: ISC, UI, BEAPP Improveme...

Authentication does not work through a proxy Solution Add proxy to config: error_page 403 http...

OTA updates not working What happened? Starting with v3.3.8.dev1, OTA updates do not work on no...

Everything here requires the device to run in Zigbee Hub mode and SLZB-OS v3.3.8.dev0 or higher. ...

4. About Zigbee Hub mode It is highly recommended to use U series coordinators for this mode (SL...

Please note!To use this functionality, you need to update your Home Assistant to 2026.8 or higher...

Importantly Please follow the placement of add-ons in these photos carefully. An incorrectly ins...

How to open device Video guide https://youtu.be/gYNhB0CZMaU?t=246 Snaps locations

1. Open Device Page You should be redirected to the Z-Wave adapter page. Click Add Device.If not...

1. Open Integrations Menu Go to Settings → Devices & Services, then click Add Integration at the...

Z-Wave JS UI is a powerful Z-Wave Home Assistant integration with a full web interface for netw...

SLZB-MRW10 is a compact, powerful multiprotocol adapter developed by SMLIGHT, integrating: CC2...

Insert the USB port of the air conditioner Wait for the AC-wifi network to appear Connect to ...

USB/LAN mode button switches the device from LAN to USB mode and vice versa.This button is also...

FAQ I switched the device to router mode but it did not appear in Zigbee2MQTT / ZHA The device ...

Precompiled firmware 1. Install driver: https://learn.sparkfun.com/tutorials/how-to-install-ch34...

Executive summary: SLZB-06 series - can run Zigbee or Thread (and capable for Multiprotocol, b...

Where did the changes take place? Zigbee Hub mode users (Does not apply to you if you are using ...

OS v1.0.0 TL released on 20260710 The official, stable release of SMHUB OS v1.0.0 is finally here...

Your SMHUB can be updated or restored in three different ways: OTA (recommended) – simple up...