SLZB-06x/MRx/MRxU/Ultima series
SLZB Series Overview
Executive summary: SLZB-06 series - can run Zigbee or Thread (and capable for Multiprotocol, b...
SLZB-MRW10 and MRW10U
Overview
SLZB-MRW10 is a compact, powerful multiprotocol adapter developed by SMLIGHT, integrating: CC2...
🧰 Manual for Testers: Setting Up Z-Wave JS UI in Home Assistant
Z-Wave JS UIÂ is a powerful Z-Wave Home Assistant integration with a full web interface for netw...
🧰 Manual for Testers: Z-Wave Integration Installation (Home Assistant)
1. Open Integrations Menu Go to Settings → Devices & Services, then click Add Integration at the...
🧰 Manual for Testers: Pairing a Z-Wave Device
1. Open Device Page You should be redirected to the Z-Wave adapter page. Click Add Device.If not...
SLZB-Ultima
Installing add-ons on SLZB-Ultima
Importantly Please follow the placement of add-ons in these photos carefully. An incorrectly ins...
Opening the case
How to open device Video guide https://youtu.be/gYNhB0CZMaU?t=246 Snaps locations
Buttons and LEDs functions
USB/LAN mode button switches the device from LAN to USB mode and vice versa.This button is also...
SLZB-xxU and ZWA-2
✅ Using ZWA-2 Z-Wave Dongle with SLZB-MR1U via USB Passthrough Overview Many users asked whet...
ESPHome firmware for Ultima and xU Series
SLZB ESPHome Firmware Flashing Guide for SLZB-Ultima, MRxU and 06xU Open SLZB-ESPHome reposi...
Thread setup (network and USB connection)
Thread setup for Home Assistant: two options SLZB devices support two ways to run a Thread netwo...
Zigbee network sniffing guide for SLZB-MRx and SLZB-06Mx adapters
Prerequisites 1. Coordinator You will need coordinator with EFR32 radio module from Silicon Lab...
FAQ and troubleshooting
FAQ I switched the device to router mode but it did not appear in Zigbee2MQTT / ZHA The device ...