Internation
Change regionOrder with International or Local delivery
Best picks for you:
Filter by:
Bring Z-Wave to your SMLIGHT device. This addon adds Z-Wave 800 and Z-Wave Long Range support using Silicon Labs' latest EFR32ZG23 chip — the same platform used in premium Z-Wave controllers. It plugs directly into compatible SMLIGHT devices and lets you control Z-Wave smart home devices like locks, sensors, and thermostats alongside your existing Zigbee and Thread network. With Z-Wave Long Range, you get extended coverage that can reach outdoor sensors and detached buildings. The module includes hardware-level encryption (Secure Vault) for safe device pairing and communication.
Latest generation Z-Wave Plus V2 and Z-Wave Long Range for maximum compatibility and reach.
Z-Wave Long Range reaches outdoor sensors, garages, and detached buildings that standard Z-Wave can't.
Silicon Labs Secure Vault provides secure boot and encrypted communication out of the box.
Connects to compatible SMLIGHT devices via the built-in expansion slot — no soldering or adapters.
SMA antenna connector for even better range when needed.
Under 1 µA in deep sleep — negligible impact on your device's power consumption.
| Parameter | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|
| Supply Voltage | 4.5 | 5.0 | 5.5 | V |
| I/O Logic Level | — | 1.8 | — | V |
| Active Current (RX) | — | 4.0 | — | mA |
| Active Current (TX, +14 dBm) | — | 25.5 | — | mA |
| DeepSleep Current | — | 0.85 | — | µA |
| Operating Temperature | -40 | — | +85 | °C |
Works with SMLIGHT devices and external platforms. Standard interfaces make DIY integration straightforward.
| Series | Notes | |
|---|---|---|
| SLZB-Ultima | ✓ | Built-in slot |
| SLZB-U2L | ✓ | Built-in slot |
| SMHUB Essential / Premium | ✓ | Built-in slot |
| SMHUB-Nano | ✓ | Via USB-Extender |
| SMHUB-NanoMR | ✓ | Via USB-Extender |
| SLZB-06xU | ✓ | Via USB-Extender |
| SLZB-MRxU | ✓ | Via USB-Extender |
| SLWF-09 | ✓ | Via USB-Extender |
| Platform | Notes | |
|---|---|---|
| ESP32 (all variants) | ✓ | UART interface |
| Raspberry Pi | ✓ | UART / GPIO |
| Any MCU with UART | ✓ | 3.3V or 1.8V logic |
Best picks for you:
Filter by:
Home