flag

Internation

Change region

Order with International or Local delivery

Best picks for you:

  • There are no better offers

Filter by:

    usbSvg
    usbSvg
    usbSvg
    usbSvg
    usbSvg

    Smart begins here.

    Built for Smart Home Intelligence.

    SLZB-06p7

    Order with International or Local delivery

    Best picks for you:

    • There are no better offers

    Filter by:

      device
      SMLIGHT SLZB-06p7

      Zigbee Thread PoE Ethernet USB Adapter, CC2652P powered

      device

      • Zigbee & Matter-over-Thread

        Supports Zigbee and Matter-over-Thread, pre-flashed and ready to use out of the box.

      • Flexible connectivity

        Connect via Ethernet, Wi-Fi, or USB. Switch modes instantly via button or firmware.

      • Power-over-Ethernet (PoE)

        Skip extra cables—power your hub directly through Ethernet.

      • Home Assistant compatible

        Seamless integration with ZHA, Zigbee2MQTT, and other smart home platforms.

      • Boosted signal performance

        Equipped with +20 dB amplifier and +5 dBi antenna for strong, stable coverage.

      • Compact & distinctive

        Minimalist and original casing design fits discreetly into any interior.

      house
      house
      house

      With Ethernet-enabled SLZB-06p7 series coordinator, run Zigbee or Matter-over-Thread anywhere - without tying it to your smart-home (Home Assistant, openHAB, HomeSeer etc) server: remotely or even across buildings on different side of globe. One smart network, unlimited range.

      Photo gallery

      Slide 1
      Slide 2
      Slide 3
      Slide 4
      Slide 5
      Slide 6
      Slide 7
      Slide 8
      thumb 0
      thumb 1
      thumb 2
      thumb 3
      thumb 4
      thumb 5
      thumb 6
      thumb 7

      SLZB-OS

      powered

      Functions

      ZIGBEE ADAPTER

      In Zigbee mode, slzb06p7 works as a Coordinator or Router and is compatible with Zigbee2MQTT and ZHA.

      THREAD ADAPTER

      Use the slzb06p7 in Thread mode for Thread. One-click switching between Zigbee and Thread.

      +20dB +5dB

      The Zigbee/Thread slzb06p7 adapter has a +20 dB amplifier on board and a +5 dB antenna. Cover your farthest locations.

      LAN, Wi-Fi and USB + POE

      slzb06p7 adapter supports LAN, Wi-Fi, or USB connectivity, with power via USB Type-C or PoE.

      FIRMWARE

      PRE-FLASHED

      Just plug and play. You will get your slzb06p7 pre-flashed and ready to use.

      ESPHOME SUPPORT

      For DIY geeks, the slzb06p7 can run ESPHome firmware with basic necessary functionality.

      SMART FIRMWARE

      slzb06p7 packed with advanced features like WireGuard, DDNS, OTA, Zigbee Hub, USB Passthrough, OTBR and more.

      SECURE

      Control access to the slzb06p7 adapter settings through secure login and password

      CHIPSETS

      CC2652P7

      The Zigbee or Thread SoC is based on the powerful CC2652P7 from Texas Instruments.

      ESP32

      The powerful ESP32 chip (2 cores @ 240Mhz) handles all the functions of the slzb06p7.

      LAN8720

      A reliable Ethernet SoC from Microchip ensures a stable Ethernet connection.

      CP2102

      Best-in-class USB/UART SoC converter. Do not compromise on speed and quality.

      UPDATES

      REMOTE RADIO UPD

      Update the CC2652P7 radio SoC firmware remotely through the web interface, with no physical access required.

      REMOTE CORE UPD

      SLZB-OS running on your slzb06p7 can be updated remotely. Full control wherever you are!

      RESET FUNCTION

      Quickly restore the slzb06p7 device if something goes wrong during setup, update, or configuration.

      Ethernet support

      slzb06p7 is DIY-enthusiast friendly: it contains limited pinouts for both ESP32 and CC2652P7 chips.

      USER FRIENDLY

      EASY TO PLACE

      Want to install it on the wall or under the table? Use double-sided adhesive tape or screws - slzb06p7 fits both!

      NEWBY MANUAL!

      Don't know how to start? No worries - an exhaustive manual is included!

      POWERFUL ANTENNA

      Need to cover a large area with your Zigbee or Thread network? No worries - a powerful antenna is included!

      TINY DESIGN

      Now you can place your adapter wherever you want! slzb06p7 is small and compact!

      OTHER

      4X LEDS

      Want to install it on the wall or under the table? Use double-sided adhesive tape or screws - slzb06p7 fits both!

      BUTTON

      Need to cover a large area with your Zigbee or Thread network? No worries - a powerful antenna is included!

      ROTATABLE ANTENNA

      Need to cover a large area with your Zigbee and Thread network? No worries - two powerful antennas are included!

      ENGINEERED IN UKRAINE

      slzb06p7 is designed in Ukraine. Ukrainian quality - guaranteed.

      Useful Resourses

      Featured Resources

      Home Assistant visual card for SLZB-MRxU
      13/02/2026

      Home Assistant visual card for SLZB-MRxU  - more.

      Zigbee+Bluetooth hub on SLZB-06
      08/06/2025

      Zigbee+Bluetooth hub on SLZB-06  - more.

      160+ Zigbee devices
      08/06/2025

      160+ Zigbee devices  - more.

      Two or more coordinators with one Home Assistant
      08/06/2025

      Two or more coordinators with one Home Assistant  - more.

      3D print mount holders designs SLZB Series
      08/06/2025

      3D print mount holders designs SLZB Series  - more.

      Fixing my Zigbee with a network Zigbee coordinator
      08/06/2025

      Fixing my Zigbee with a network Zigbee coordinator  - more.

      All Resources

      Home Assistant visual card for SLZB-MRxU- more

      SLZB-06 Matter-over-Thread - Youtube gui... - more

      Matter-over-Thread on SLZB-06M- more

      Zigbee+Bluetooth hub on SLZB-06- more

      160+ Zigbee devices- more

      Multiple coordinators with one HA- more

      Two or more coordinators with one Home A... - more

      Real feedback- more

      Link remote SLZB-06 via VPN to you Home ... - more

      SLZB-OS changelog- more

      3D print mount holders designs SLZB Seri... - more

      Best Zigbee Coordinator - independent re... - more

      Fixing my Zigbee with a network Zigbee c... - more

      Official Web Flasher SLZB-06 and MR Seri... - more

      SMLIGHT SLZB Home Assistant Official int... - more

      Useful Resourses

      Electrical Diagram SLZB device
      Electrical Diagram SLZB device

      Package Device

      Package device slzb06p7
      Package device slzb06p7
      deviceantena for device
      wrench
      screwscrew
      scotchscotch
      ruler

      Specifications

      Hardware

      • Radio chip: CC2652P7 Texas Instruments
      • Core chip: ESP32-S3 Espressif
      • Ethernet: W5500 WIZnet
      • USB-to-Ethernet Passthrough: Yes
      • Antenna Zigbee: L-I-shaped +5dB Baishi
      • Antenna Thread: L-I-shaped +5dB Baishi
      • Antenna Wi-Fi/Bluetooth On PCB, +2dB
      • PoE Transformer SMLIGHT 5V

      Power / Data

      • Type-C in: Yes
      • Power-over-Ethernet (PoE) in: Yes
      • Type-C and/or PoE simultaneously: Yes
      • Overvoltage power protection Yes
      • Otoelectronic isolation Yes
      • PoE standard Supported: IEEE 802.3af (48V)
      • PoE to USB Passthorugh power: Yes
      • Energy consumption: 1-1.5W

      Device mode

      • Zigbee coordinator Z2M/ZHA: Yes
      • Zigbee router: Yes
      • Matter-over-Thread router: Yes
      • Standalone Zigbee Hub: Yes
      • Zigbee/Thread to Ethernet: Available
      • Zigbee/Thread to USB: Available
      • Zigbee/Thread to Wi-Fi: Available

      Compatibility

      • Zigbee2MQTT native support: Yes
      • ZHA native support: Yes
      • OTBR Support Yes
      • Pre-flashed Plug&Play: Yes
      • Ethernet support: Yes, 10/100Mb
      • Wi-Fi support: Yes, 2.4GHz
      • Bluetooth ready: Yes
      • SLZB-OS compatible: Yes
      • Home Assistant integration: Yes

      Features

      • External 5dB antenna: Yes
      • Internal Wi-Fi / Bluetooth antenna: Yes
      • Radio SoC output gain: up to +20dB
      • ESP32 Flasher integrated: Yes
      • Radio SoC flasher inegrated Yes
      • Status LEDs: Yes, 4
      • Button for control: Yes

      Dimensions and weight

      • Adapter: 160x24x28mm, 86g
      • Antenna: 192x12x12mm, 15g
      • Packing (full): 180x25x40mm, 105g

      Operating environment

      • Temperature: +5 – +35°C
      • Humidity: < 60%

      Where to buy MODEL

      Best picks for you:

      • There are no better offers

      Filter by:

        Instant Answers to Common Questions

        This FAQ applies to all devices in the SLZB-06x/MRx series, including SLZB-06, SLZB-06M, SLZB-06P7, SLZB-06P10, SLZB-06Mg24, SLZB-06Mg26, SLZB-4G, SLZB-MR1, SLZB-MR2 and SLZB-MR3. For simplicity, we refer to them collectively as SLZB-06x/MRx series devices throughout this section.

        SLZB-06x/MRx series devices are smart home adapters that act as a bridge between your Zigbee or Thread devices and your smart home system, like Home Assistant. Think of them as the middleman that helps your smart lights, sensors, switches, and other devices talk to your smart home hub.
        They support various connection options like Ethernet, USB, Wi-Fi, and PoE, and come pre-configured and ready to use. Whether you want to control your devices locally, remotely, or even without a separate smart home server these adapters offer a reliable, flexible way to build and expand your smart home.
        Yes, SLZB-06p7 series devices are fully compatible with Home Assistant and work out of the box.
        They come pre-flashed and tested, so you don’t need to worry about manual firmware installation.
        Depending on the firmware variant, each device can function as a Zigbee coordinator, Zigbee router, or Matter-over-Thread device.
        They support both ZHA and Zigbee2MQTT integrations, and can be connected via Ethernet or USB.
        Home Assistant will detect them automatically after connection.
        SLZB-06x/MRx series devices can operate in several flexible modes, depending on your use case and the installed firmware. Supported modes include:
        • Zigbee Coordinator – for managing a Zigbee network via ZHA or Zigbee2MQTT.
        • Zigbee Router – to extend the range of an existing Zigbee network.
        • Matter-over-Thread Border Router – to control your Matter devices over Thread network.
        • Zigbee Hub Mode – direct control of Zigbee devices via built-in web interface (available only on TI-based models like SLZB-06, 06P7, 06P10).
        You can switch between modes through the web interface one-click action.
        Yes - SLZB-06xU/MRxU supports USB passthrough, letting you plug a USB device into it and access it over the network. It works with most common USB-to-UART chips such as CP210x, CH340/CH9102. If SLZB-06xU/MRxU is powered via PoE, the connected USB device can be powered from SLZB-06xU/MRxU’s USB port as well.
        SLZB-06x/MRx series devices support both Power over Ethernet (PoE) and USB Type-C power options. You can choose the one that fits your setup best. PoE enables a clean, single-cable installation with both data and power over Ethernet. Alternatively, if PoE is not available, simply power the device via a regular USB Type-C adapter.
        You don’t need to change or configure anything when switching power sources. SLZB-06x/MRx series devices can be powered from either PoE (Power over Ethernet) or USB Type-C, and both can even be connected at the same time. Thanks to optoelectronic isolation, each power source is safely separated and protected from the other, ensuring reliable operation regardless of how you power the device.
        You can update both the Core chip and the Zigbee/Radio chip with just one click. There are two options:
        • Via the device’s built-in web interface one-click feature;
        • For Home Assistant users, directly via the official SMLIGHT SLZB integration.

        No cables, no tools, no manual flashing - quick and reliable updates in seconds.
        Yes, SLZB-06x/MRx series devices can work as Zigbee-to-Wi-Fi adapters. When running in Wi-Fi mode, the device connects wirelessly to your network while acting as a Zigbee coordinator (via ZHA or Zigbee2MQTT).
        However, keep in mind that Wi-Fi, Zigbee, and Thread all operate in the 2.4 GHz band, which can lead to signal interference. While the setup is fully supported and functional, we recommend careful channel planning and proper placement to avoid wireless conflicts and ensure stable performance.
        Yes, you can. SLZB-06x/MRx series devices support a feature called Zigbee Hub mode, which allows direct control and monitoring of Zigbee devices through the built-in web interface - no need for Home Assistant or any external smart home server.
        However, please note that Zigbee Hub mode is available only on devices based on TI Zigbee chips, such as SLZB-06, SLZB-06P7, and SLZB-06P10. This mode is ideal for small setups where you need basic control (e.g. switching devices, viewing sensors) without full automation. For advanced use cases, Home Assistant or Zigbee2MQTT integration is recommended.
        Yes, SLZB-06x/MRx series devices can function as Matter-over-Thread border routers, allowing you to integrate Thread-based Matter devices into your smart home setup. This enables secure, low-power, and reliable communication over Thread.
        Yes, SLZB-06x/MRx series devices can function as Bluetooth Low Energy (BLE) proxy devices for Home Assistant. This allows them to relay BLE signals (e.g. from temperature or presence sensors) to Home Assistant over the network, extending Bluetooth coverage in your home.
        To use this feature, you need to flash a special ESPHome-based Bluetooth Proxy firmware. This can be done directly from the built-in SLZB-OS web interface. However, please note that doing so will replace SLZB-OS, and the device will no longer function as a Zigbee or Thread adapter until SLZB-OS is flashed back - which can also be done at any time via the same web interface.
        SLZB-OS is the official operating system developed by SMLIGHT for the SLZB-06x/MRx series devices. It runs on the Core SoC and provides:
        • A built-in web interface for setup, configuration, and one-click firmware updates
        • Support for Zigbee Coordinator, Router, Zigbee Hub Mode, and Matter-over-Thread roles
        • Integration with Home Assistant via ZHA, Zigbee2MQTT, or SMLIGHT’s native integration
        • Optional features like PoE control, debug logging, and hardware diagnostics
        SLZB-OS is preinstalled and tested on all devices out of the box, so you can get started immediately - no flashing required. It’s also easy to reflash later if you try other firmware like ESPHome or other Community builds and want to return to full functionality.
        Yes, you can. SLZB-06x/MRx series devices are fully compatible with community-driven open-source firmware for both the Zigbee radio (e.g. Zigbee coordinator firmware for TI or Silicon Labs chips) and the ESP32 core (e.g. ESPHome, Tasmota, or custom ESP32 apps).
        Additionally, SMLIGHT provides an official open-source firmware for the core, which serves as a lightweight alternative to SLZB-OS. While it doesn’t offer the full feature set and polish of SLZB-OS, it’s a great starting point for customization and community contributions.