SLWF-11 Manual · 4. Main Settings

SLWF-11 User Manual — Part 4 of 10

1) Connect to the device

1. Power the controller. On first boot it broadcasts a Wi-Fi access point named WLED-AP.
2. Join WLED-AP (default password wled1234).
3. The captive portal opens automatically; otherwise browse to http://4.3.2.1.

2) Join your home Wi-Fi

1. Open WIFI SETTINGS.
2. Enter your 2.4 GHz SSID and password (ESP8266 does not support 5 GHz).
3. Optionally set an mDNS hostname, then Save & Connect. The device reboots and joins your network.

3) Configure the LED output

Setting	Recommended value
LED count (length)	Exact number of LEDs on your strip
Data GPIO	2
Clock GPIO (clocked strips only)	12
Color order	GRB for WS2812B (adjust if colors look wrong)
Max current / power limit	Match your power supply's rated amperage

ESP8266 LED count The ESP8266 comfortably drives several hundred LEDs on a single output. For large installations, keep effects modest, enable a power/current limit, and use power injection. Follow WLED's ESP8266 guidance at kno.wled.ge.

---

← Power and LED Wiring · Manual contents · IR Remote Control →