§ Series · USB single-radio · Zigbee + Thread
SLZB-07.
Zigbee in a USB stick.
Plug-and-play USB Zigbee coordinator. Five radio SoCs across Silicon Labs and Texas Instruments. CP2102N USB-to-UART bridge, +20 dB radio amp, rotatable +3 dB antenna. 18 × 54 × 10 mm — the smallest USB Zigbee stick with an external antenna.
Current model
SLZB-07
Radio SoC
EFR32MG21
Availability
In stock — ships in 48h
┌
┐
└
┘

§ SELECT MODELEverything identical except the radio SoC
§ 01 / Why SLZB-07
Five variants. One USB stick.
01
The tiny one
18 × 54 × 10 mm. The smallest USB Zigbee stick with an external antenna. Slots into adjacent ports without blocking them.
02
Pre-flashed, plug-and-play
Works with Home Assistant ZHA and Zigbee2MQTT out of the box. No cables, no toolchain, no flashing. Connect USB → done.
03
+20 dB amp · +3 dB antenna
On-board +20 dB amplifier and a 3-axis rotatable +3 dB external antenna. Covers the farthest corners without an extension cable.
§ 02 / Chipsets
The only thing that changes between variants.
RADIO SOC
EFR32MG21
Silicon Labs
Zigbee / Thread
ANTENNA · +3 dB · rotatable
SERIAL BRIDGE
CP2102N
Silicon Labs · USB / UART
Best-in-class throughput · supports EFR32 autoflash
SHARED ACROSS ALL 07 VARIANTS
Radio SoC
Vendor
Capabilities
Year
Current pick?
EFR32MG21
Silicon Labs
Zigbee 3.0 · Thread · proven baseline
2019
● IN SLZB-07
EFR32MG24
Silicon Labs
Zigbee 3.0 · Thread 1.3 · AI/ML accelerator
2022
—
EFR32MG26
Silicon Labs
Zigbee 3.0 · Thread 1.4 · 2× RAM vs MG24
2025
—
CC2652P7
TI
Zigbee 3.0 · Thread 1.3 · +20 dBm · extended
2023
—
CC2674P10
TI
Zigbee 3.0 · Thread 1.3 · +20 dBm · extra RAM
2024
—
Shared across every variant
CP2102N
USB ↔ UART bridge
Silicon Labs' best-in-class USB-to-serial converter. Hardware flow control. Supports EFR32 autoflash — flashing over USB with no extra cables.
+20 dB amp
On-board RF
Integrated radio amplifier. Combined with the external +3 dB antenna, reaches the farthest corners without extension cables.
4-layer PCB
RF isolation
Four-layer board isolates the radio from USB and host miniPC interference. The reason SLZB-07 holds link in cramped server racks.
§ 03 / Functions
What this stick actually does.
CORE
Zigbee 3.0 coordinator
Works with Zigbee2MQTT and ZHA out of the box. Pre-flashed. Multi-coordinator setups supported.
CORE
Thread / Matter ready
MultiPAN firmware available. Switch to Thread/Matter on the same hardware.
CORE
DIY pinouts
Pinouts exposed for the radio SoC — for DIY flashing, debugging, and custom firmware.
I/O
USB-A plug
Plugs directly into any USB-A port. Tested with server racks, miniPCs, Synology NAS, Raspberry Pi.
I/O
No extension cable needed
Board layout cancels host-side USB interference — extension cables are optional, not required.
I/O
Rotatable +3 dB antenna
3-axis-rotatable external antenna. Point it where coverage is weakest.
FIRMWARE
Pre-flashed
Ships ready. Plug and play with ZHA / Zigbee2MQTT. No tools required.
FIRMWARE
Remote firmware update
Update the radio firmware remotely — just need access to the host server. Ideal for rare-visited installations.
FIRMWARE
EFR32 autoflash
Native autoflash mode on Silabs variants — flashing over USB with no toolchain.
FIRMWARE
Community firmwares
Supports all major community Zigbee firmwares — Z2M coordinator, Thread/Matter, multi-PAN.
HARDWARE
CP2102N serial bridge
Silicon Labs USB ↔ UART with hardware flow control. No compromise on speed or reliability.
HARDWARE
Made in Ukraine
Designed, developed, and tested in Ukraine. Ukrainian quality guaranteed.
§ 04 / Why SLZB-07
vs. other USB Zigbee sticks.
Engineering choice
SLZB-07
Other A
Other B
Based on fast CP2102N USB/UART SoC
●
—
—
External antenna for better coverage
●
●
—
Small & tiny — won't block adjacent USB ports
●
—
—
Hardware flow control supported
●
●
—
4-layer PCB — RF isolated from USB & miniPC
●
—
—
Radio SoC integrated on a single board (not modular)
●
●
—
EFR32 autoflash for flashing over USB
●
●
—
Pairs with SLZB-06 Ethernet adapter for multi-site setups
●
—
—
§ 05 / Compare
Five variants. Side by side.
Radio SoC
EFR32MG21
EFR32MG24
EFR32MG26
CC2652P7
CC2674P10
Radio vendor
Silicon Labs
Silicon Labs
Silicon Labs
Texas Instruments
Texas Instruments
Positioning
MAINSTREAM
MG24
PREMIUM
TI EXTENDED
TI RECOMMENDED
Availability
In stock — ships in 48h
In stock
Pre-order — ships Apr 2026
In stock
In stock
Everything else
CP2102N USB/UART · +20 dB radio amp · +3 dB rotatable antenna · 4-layer PCB · EFR32 autoflash · DIY pinouts · USB-A plug · 18 × 54 × 10 mm · +5 to +35 °C
Not sure which to pick?
Default mainstream pick — the original SLZB-07
Silabs with on-chip AI/ML accelerator
Top-shelf Silabs, future-proof for years
Extended TI range with Thread 1.3
Latest TI chip, maximum headroom
§ 06 / In the box
What you actually unbox.
01
SLZB-07 USB stick
18 × 54 × 10 mm
02
External antenna
+3 dB · rotatable · 3-axis
03
QR-code manual card
Scan for the complete online manual.
§ 07 / Full specifications
Every number. Every port.
Main Zigbee 3.0 chip
EFR32MG21 (Silicon Labs)
Serial chip
CP2102N (Silicon Labs)
Radio SoC output gain
+20 dB
External antenna
+3 dB, rotatable (3-axis)
PCB
4-layer, RF-isolated
Autoflash mode
Yes (EFR32 variants)
§ 08 / Useful resources
Manuals. Guides. Reviews.
- SLZB-07 manual
- Multiple adapters setup guide
- Zigbee2MQTT configuration for SLZB-07
- Flashing Thread/Matter firmware on SLZB-07
- Reddit: SLZB-07 long-term review
- YouTube: SLZB-07 unboxing & first setup
- DIY pinouts & custom firmware
- Best Zigbee Coordinator — independent review
- HA Community: SLZB-07 + HA visual card
- 3D-print USB port holders for SLZB-07
§ 09 / FAQ
12 questions. Straight answers.
Yes. Plug it into the USB port of your server and start ZHA in Home Assistant, or Zigbee2MQTT. It ships pre-flashed and is auto-detected by Home Assistant.
§ 13 / Video reviews
Independent reviewers. Actual installs.
14:22
SLZB-MR1U Review — the new mainstream Zigbee coordinator
89k views·Mar 2026
22:08
I replaced 3 Zigbee dongles with one SLZB-MR3U — here's what happened
156k views·Feb 2026
31:47
Multi-radio deep dive: MR1U vs MR3U vs MR5U side-by-side
62k views·Apr 2026
§ 14 / Owner feedback
12 owners. In their own words.
🇺🇸MR1U
Swapped from a CC2652P dongle to the MR1U for the Ethernet + PoE combo. Put it in the basement wiring closet where my mesh was weakest — and suddenly the whole top floor came alive again.
🇺🇸MR3U
Running MR3U as a dedicated Matter-over-Thread border router alongside my existing Zigbee coordinator. The dual-radio split lets me keep both networks on their optimal channels. Setup took 10 minutes.
🇩🇪MR5U
MR5U with twin MG24s is a dream for my standardization — one toolchain, one set of firmware builds, one debugging workflow. Silicon Labs only. Beautiful.
§ 15 / Useful links
Everything else. Guides, forums, firmware, mounts.
●Guides
SLZB-MRxU full setup guide
smlight.tech/docsApr 2026→
●Guides
Matter-over-Thread on MR3U — step by step
smlight.tech/manualMar 2026→
●Guides
PoE network planning for multi-radio coordinators
docs.smlight.techFeb 2026→
●Guides
SLZB-OS — WireGuard setup walkthrough
smlight.tech/slzbosJan 2026→
r/Community
r/homeassistant · SLZB-MR series megathread
reddit.comOngoing→
◈Community
SMLIGHT Discord · #mr-series channel
discord.gg/smlightLive→
✦Community
HA forum · ZHA vs Z2M with MR coordinators
community.home-assistant.ioMar 2026→
✦Community
Zigbee2MQTT — SMLIGHT device compatibility
zigbee2mqtt.ioUpdated weekly→
❯Reviews
SLZB-MR1U review — SmartHomeScene
smarthomescene.comMar 2026→
❯Reviews
Best Zigbee coordinator 2026 — independent roundup
smarthomescene.comFeb 2026→
❯Reviews
SLZB-MR4U deep dive
haade.frMar 2026→
❯Reviews
Kiril Peyanski · MR series comparison
peyanski.comApr 2026→
●Firmware
SLZB-OS releases & changelog
smlight.tech/slzbosWeekly→
●Firmware
Official Web Flasher — SLZB series
smlight.tech/flasherLive→
</>Firmware
ESPHome config examples for MRxU
github.com/smlight-devMar 2026→
</>Firmware
Open-source core firmware (MIT)
github.com/smlight-devOngoing→
⌂DIY
3D-print mount holders — Printables
printables.com2025→
⌂DIY
DIY debug probe adapter for MRxU
hackaday.ioFeb 2026→
●DIY
Rack-mount bracket (ref design)
smlight.tech/downloadsJan 2026→
●DIY
Antenna placement & polarization guide
smlight.tech/docsMar 2026→
⇌Integrations
Home Assistant native integration
home-assistant.io/integrations/smlightOngoing→
⇌Integrations
ZHA — SMLIGHT radio profiles
zigbee2mqtt.ioUpdated weekly→
⇌Integrations
openHAB 4.3 — SMLIGHT binding
openhab.orgFeb 2026→
●Integrations
Matter commissioning via OTBR
smlight.tech/docsMar 2026→
← Scroll horizontally for more·Filter by category above