WORLDWIDE DELIVERY:

LOCAL FAST DELIVERY:

Useful links:

  • SLZB-06 Matter-over-Thread – Youtube guide
  • Matter-over-Thread on SLZB-06M – here
  • Zigbee+Bluetooth hub on SLZB-06 – here
  • SLZB-06 FW video review – here
  • Two or more coordinators with one Home Assistant – here and here
  • Real feedback – here
  • 160+ Zigbee devices – here

 

PRIVATE INSTALLATION EXAMPLES

BUSINESS INSTALLATION EXAMPLES

WHAT MAKES SMLIGT SLZB-06M THE BEST OPTION TO USE AS YOUR ZIGBEE ADAPTER?

SMLIGHT SLZB-06M
 Other POE adapters
Supports Zigbee to Ethernet? Yes Yes
Change Ethernet/USB working mode through firmware distantly rather than by mechanical switches? Yes No
Based on powerful EFR32MG21 Zigbee chip? Yes Yes
Is the antenna +5dB included in the package? Yes No / Yes
Based on UART/USB SoC CP2102 that supports up to 921600 bps speed? Yes No
Do not need to change the physical switch between POE and USB powering? Yes No
Has optoelectronic isolation between Ethernet and USB so you can securely connect both RJ45 and type-C at the same time? Yes No
ESP32 and CC2652P integrated as chips on a single board to improve the system’s stability rather as a combination of modules on the boards? Yes No
Tiny thin design (<22mm wide) to fit any small places? Yes No
Peripheral based on ESP32? Yes Yes
Supports ESP32 autoboot mode for flashing over Type-C? Yes No

FUNCTIONS

 

LAN or USB

Use SLZB-06M as Zigbee 3.0 to LAN, WiFi or USB. Forget about separate devices. Change mode online or via button





PoE power


You can power your SLZB-06M device either through PoE or Type-C. PoE 802.3af standard is supported

			

			

				
				
				
				
				

				
				
				
				
				


+20dB +5dB


Zigbee 3.0 SLZB-06M adapter has +20dB amplifier on board & +5dB antenna. Cover your farthest locations

			

			

				
				
				
				
				

				
				
				
				
				
 




Coordinator or Router


Supports both Zigbee 3.0 modes – Coordinator or Router. Just flash over the web interface appropriate firmware

			

			

				
				
				
				
			

				

				
				
				
				
				

				
				
				
				
				


FIRMWARE


 

			

			

				
				
				
				
			

				

				
				
				
				
				

				
				
				
				
				


PRE-FLASHED 


Just plug-and-play. You will get your SLZB-06M pre-flashed and ready to use

			

			

				
				
				
				
				

				
				
				
				
				
 


OPEN-SOURCE


For security geeks there is an open source firmware version that covers core basic functionality

			

			

				
				
				
				
				

				
				
				
				
				


ADJUSTABLE


Full control of your device. Need to change mode from LAN to USB? Just one click. Want to turn off Power LED? One click!i

			

			

				
				
				
				
				

				
				
				
				
				


SECURE


Control access to the Zigbee 3.0 SLZB-06M adapter’s settings through secure login and password

			

			

				
				
				
				
			

				

				
				
				
				
				

				
				
				
				
				


CHIPSETS AND TECHS


 

			

			

				
				
				
				
			

				

				
				
				
				
				

				
				
				
				
				


EFR32MG21


Zigbee 3.0 SoC is based on the powerful chip EFR32MG21 from Silicon Labs, reliability confirmed by thousands of users

			

			

				
				
				
				
				

				
				
				
				
				







ESP32


Powerful ESP32 chip makes control over all the functions of the device

			

			

				
				
				
				
				

				
				
				
				
				


LAN8720


Reliable Ethernet SoC from Microchip takes care on stable Ethernet connection

			

			

				
				
				
				
				

				
				
				
				
				


CP2102


Best in class USB/UART SoC converter. Do not compromise on speed and quality

			

			

				
				
				
				
			

				

				
				
				
				
				

				
				
				
				
				


UPDATES


 

			

			

				
				
				
				
			

				

				
				
				
				
				

				
				
				
				
				


REMOTE ZIGBEE UPD


The only Zigbee coordinator with the option to update Zigbee chip over web-interface just with one click!

			

			

				
				
				
				
				

				
				
				
				
				







REMOTE ESP32 UPD


ESP firmware could be updated distantly. Full control wherever you are!

			

			

				
				
				
				
				

				
				
				
				
				


ESP32 Autoboot


SLZB-06M features auto boot mode for ESP32. If you want to flash over USB – just plug-and-do!

			

			

				
				
				
				
				

				
				
				
				
				


DIY PINOUTS


SLZB-06 is a DIY enthusiasts friendly: it contains pinouts for both ESP32 and EFR32MG21 chips

			

			

				
				
				
				
			

				

				
				
				
				
				

				
				
				
				
				


USER FRIENDLY


 

			

			

				
				
				
				
			

				

				
				
				
				
				

				
				
				
				
				


EASY TO PLACE


Want to install it on the wall or under the table? Use doulbe sided adhesive tape or screws, SLZB-06M fits both!

			

			

				
				
				
				
				

				
				
				
				
				


 







NEWBY? MANUAL!


Do not know how to start? No worries, exhaustive manual is included!

			

			

				
				
				
				
				

				
				
				
				
				


POWERFUL ANTENNA


Need co cover with Zigbee network big area? No worries, powerful antenna is included!

			

			

				
				
				
				
				

				
				
				
				
				


TINY DESIGN


Now you can put your adapter wherever you want! SLZB-06M is a small and tiny!

			

			

				
				
				
				
			

				

				
				
				
				
				

				
				
				
				
				


OTHER


 

			

			

				
				
				
				
			

				

				
				
				
				
				

				
				
				
				
				


4X LEDS


Do you like responses from your devices with LED? SLZB-06M has 4 LEDs for intercation with the users!

			

			

				
				
				
				
				

				
				
				
				
				







BUTTON


Control device mode and other functions through physical button.

			

			

				
				
				
				
				

				
				
				
				
				


ROTATABLE ANTENNA


Rotatable in 3 dimensions antenna secures best positions for the best signal

			

			

				
				
				
				
				

				
				
				
				
				


MADE IN UKRAINE


SLZB-06M designed, developed and tested in Ukraine. Ukrainian quality guaranteed.

			

			

				
				
				
				
			

				
				
			

				
				
				
				
				
				
				

				
				
				
				
				
			
			

				
				
				
				
				slzb-06-firmware-mobile
			
			

				
				
				
				
				slzb-06-firmware-mobile
			
			

				
				
			

				
				
				
				
				
				
				

				
				
				
				
				
			
			

				
				
				
				
				
			
			

				
				
			

				
				
				
				
				
				
				

				

				
				
				
				
				

				
				
				
				
				
SMLIGHT SLZB-06 – UNBOXING

			

				
				
				
				
				

				
			

			

				
				
				
				
			

				
				
			

				
				
				
				
				
				
				

				
				
				
				
				

					

					

						
						
SMLIGHT SLZB-06M SPECIFICATIONS

						
						

						
					

				

					
				

				

				

			

				
				
			

				
				
				
				
				
				
				

				

				
				
				
				
				

				
				
				
				
				




SLZB-06M SPECIFICATIONS




Main Zigbee 3.0 chip
EFR32MG21 Silicon Labs




Main control chip
ESP32 Espressif




USB/UART converter
CP2102




Ethernet SoC
LAN8720




Zigbee SoC output gain
+20dB




Additional gain antenna
+5dB




Ethernet support
Yes




WiFi support
Yes




PoE support
Yes




PoE standard supported
IEEE 802.3af (15W)




USB Type-C control
Yes





			

			

				
				
				
				
				

				
				
				
				
				




ESP32 Flasher integrated
Yes, based on CP2102




ESP32 Autoboot
Yes, through DTR / RTS




Pre-flashed
Yes, Zigbee and ESP




Zigbee 3.0 Coordinator mode
Yes




Zigbee 3.0 Router mode
Yes




Zigbee to Ethernet
Yes




Zigbee to USB
Yes




Zigbee2MQTT support
Yes




ZHA support
Yes




Tiny design
Yes, 160x22x24mm




Operating environment
+5 – +35 C






 

			

			

				
				
				
				
			

				
				
			

				
				
				
				
				
				
				

				
				
				
				
				

					

					

						
						
SMLIGHT SLZB-06M FREQUENTY ASKED QUESTIONS (FAQ)

						
						

						
					

				

					
				

				

				

			

				
				
			

				
				
				
				
				
				
				

				

				
				
				
				
				

				
				
				
				
				

				
				
				
				
				
Does SLZB-06M works with Home Assistant out of the box?

				
Yes, it does. Just plug in SLZB-06M into your LAN Ethernet or USB, and that is it. SLZB-06M is pre-flashed and ready to use.

			

				
				
				
				
				
Can I set up multiple SLZB-06M coodinators with one Home Assistant?

				
Yes, you can. You can set up as many SLZB-06M coordinators as you want with one Home Assistant. For that, you just need to run a separate instance of Zigbee2MQTT for each coordinator. We have now received feedback from our lovely Customers about using 6 items with one Home Assistant. Please also note that you can connect to devices that are outside your LAN network, e.g., somewhere in another location with access to the internet. More details can be found in this Article of the official manual.


Overall system architecture with multiple adapters looks like this:



			

				
				
				
				
				
How to select mode USB/Ethernet? Any physical switches?

				
The device can be switched between USB or Ethernet either through a web-interface or by button. Just short press – and the work mode changed. Switching by web interface allows changing the work mode distantly.

			

				
				
				
				
				
Do I need to change powering either from POE or USB? Any switch?

				
Oh no. You do not need to think about tit. No switches. Just plug in POE or type-C or both – and the device works. It distinguishes power sources and acts correspondingly.

			

				
				
				
				
				
Can I update firmware distantly, without physical access to the SLZB-06M?

				
Yes, you can. Both main chips used in SLZB-06M (EFR32MG21 and ESP32) can be updated distantly from the other global point. That makes the device suitable for installation in rare-visited locations or installation places.

			

				
				
				
				
				
Does it supports POE powering?

				
Yes, it does. The device support POE standard IEEE 802.3af. That is the “basic” POE widely used standard. Just plug and use; you do not need any other additional power cables and plugs.

			

				
				
				
				
				
What is ESP32 Autoboot?

				
That is for “Pro” users who want to flash SLZB-06M with the type-C connection. ESP32 Autoboot means that the device contains a built-in programmer and schematic that allows flashing ESP32 without any additional activities: you do not need to press buttons to make ESP32 in flash mode, and you do not need to plug in additional programmers. The only thing you need – just to plug in type-C and start flashing. Easy.

			

				
				
				
				
				
Can I connect to type-C and RJ45 at the same time? Optoelectronic isolation at place?

				
Yes. The device contains optoelectronic isolation between USB and Ethernet parts. So you can plug in SLZB-06M to both RJ45 and type-C at the same time.

			

				
				
				
				
				
When close to ear, I hear little noise from the PoE transformer. Is it Ok?

				
The enclosure of the device contains vent holes, and when close to the ears, you can hear little noise from the POE transformer. The normal is if you can’t hear it more than 50 centimeters from the device.

			

				
				
				
				
				
Can it work as Zigbee-to-WiFi adapter?

				
Yes, in addition to Zigbee-to-Ethernet/POE and Zigbee-to-USB, SLZB-06M can works in Zigbee-to-WiFi mode, more details here: https://www.youtube.com/watch?v=ps-x_-CQXp0

			

			

			

				
				
				
				
			

				
				
			

				
				
				
				
				
				
				

				

				
				
				
				
				

				
				
				
				
				
WORLDWIDE DELIVERY:

			

				
				
				
				
				

			

			

				
				
				
				
				

				
				
				
				
				
LOCAL FAST DELIVERY:

			

				
				
				
				
				

			

			

				
				
				
				
				

				
				
				
				
				
Useful links:

			

				
				
				
				
				
    

  • SLZB-06 Matter-over-Thread – Youtube guide
    • 

  • Matter-over-Thread on SLZB-06M – here
    • 

  • Zigbee+Bluetooth hub on SLZB-06 – here
    • 

  • SLZB-06 FW video review – here
    • 

  • Two or more coordinators with one Home Assistant – here and here
    • 

  • Real feedback – here
    • 

  • 160+ Zigbee devices – here
    •