NEW SLZB-07 ZIGBEE USB

SLZB-07 EFR32MG21 Zigbee + USB with 921 kbps serial speed!

SLZB-07 main page
SLZB-07 main page

WHAT MAKES SMLIGHT SLZB-07 THE BEST OPTION TO USE AS YOUR USB ZIGBEE ADAPTER?

SLZB-07
Other 1
Other 2
Based on fast CP2102 SoC?
No
No
External antenna for better coverage
No
Small and tiny design that does not interfere with other devices in server's USB port
No
No
Hardware flow control supported?
Four layers PCB to avoid RF interference with the USB and miniPC?
No
No
EFR32 integrated as chips on a single board to improve the system's stability rather as a combination of modules on the boards?
No
Supports EFR32 autoflash mode for flashing over USB?
Could be used with SLZB-06 Zigbee Ethernet adapter
No
No
SLZB-07 main page

KEY SPECIFICATIONS

 

PRE-FLASHED 

Just plug-and-play. You will get your SLZB-07 pre-flashed and ready to use with your Home Assistant ZHA and Zigbee2MQTT

+20dB +3dB

Zigbee 3.0 SLZB-07 adapter has +20dB amplifier on board & +3dB antenna. Cover your farthest locations

TINY DESIGN

SLZB-07 has the smallest design among all Zigbee USB EFR32 based adapters with external antenna!

Zigbee support and
Thread/Matter ready

Supports Zigbee 3.0 out of the box and Thread/Matter ready with multiPan firmware

CHIPSETS AND TECHS

 

EFR32MG21

Zigbee 3.0 SoC is based on the powerful chip EFR32MG21 from Silicon Labs, reliability confirmed by thousands of users.

CP2102N

Best in class USB/UART SoC converter. Do not compromise on speed and quality

EFR32 Autoflash mode

SLZB-07 features autoflash mode for EFR32. If you want to flash over USB – just plug-and-do!

DIY PINOUTS

SLZB-07 is a DIY enthusiasts friendly: it contains pinouts for EFR32MG21 chip

OTHERS

 

 


NEWBY? MANUAL!

Do not know how to start? No worries, exhaustive manual is included!

REMOTE ZIGBEE UPD

You can update chip remotely! You just need to have access to the server where the adapter is connected!

ROTATABLE ANTENNA

Rotatable in 3 dimensions powerfull antenna secures best positions for the best signal

MADE IN UKRAINE

SLZB-07 designed, developed and tested in Ukraine. Ukrainian quality guaranteed.

SMLIGHT SLZB-07 SPECIFICATIONS

Main Zigbee 3.0 chip
Serial chip
Zigbee SoC output gain
Additional gain antenna
EFR32 Autoflash
Zigbee 3.0 support
Thread/Matter ready
Zigbee2MQTT support
ZHA support
Tiny design
Operating environment
SLZB-07 specification
EFR32MG21
CP2102N
+20 dB
+3 dB
, out of the box
, out of the box
Yes, 18x54x10 mm with USB plug
+5 - +35 °C

SMLIGHT SLZB-07 FREQUENTY ASKED QUESTIONS (FAQ)

Does SLZB-07 works with Home Assistant out of the box?

Yes, it does. Just plug in SLZB-07 into the USB port of your server and start ZHA Home Assistant or Zigbee2MQTT.

Can I set up multiple SLZB-07 coodinators with one Home Assistant?

Yes, you can run multiple SLZB-07 with your single server. Please note, that all of them should be connected to the same server. If you want to cover different rooms or even buildings, you can use SLZB-07 with your server and add SLZB-06 or SLZB-06M  in other rooms or buildings. For running multiple coordinators, you just need to run a separate instance of Zigbee2MQTT or ZHA for each coordinator. More details can be found in this Article of the official manual.

Overall system architecture with multiple adapters looks like this:

Do I need to use extension cable?

In most cases, you do not need. We designed device in such a way, so it utilizes all interferences from the USB ports and can be used without extension cable!

Can I update firmware distantly, without physical access to the SLZB-07?

Yes, you can. Main chip used in SLZB-07 (EFR32MG21) can be updated distantly from the other global point. That makes the device suitable for installation in rare-visited locations or installation places. You just need to have access to your server.

NEW SLZB-07 ZIGBEE USB

SLZB-07 EFR32MG21 Zigbee + USB with 921 kbps serial speed!