Advanced Search
Search Results
92 total results found
GPIO Allocation
The table below lists all ESP32 GPIOs used by the SLWF-09, their assigned functions, and the type of interface or peripheral they control.Pins marked with “*” are only used when the corresponding add-on module (Ethernet or Microphone) is installed.The PoE add-...
SLWF-01pro
Air conditioner Wi-Fi module for Midea, Idea, Neoclima, Electrolux, Beko and many more
Breaking changes
Troubleshooting
This section lists common issues you may encounter while using the SLWF-09, along with their possible causes and solutions. 6.1 Power Issues Problem Possible Cause Solution No power LED when connected - Incorrect power supply voltag...
SLZB-MRW10 and MRW10U
Technical Specifications
The following table lists the key hardware and electrical specifications of the SMLIGHT SLWF-09 LED controller and its supported add-on modules. 7.1 Main Board Parameter Specification MCU ESP32-D0WD-V3, dual-core 240 MHz Flash Mem...
Known issues
We know this exists and are working on a fix
Frequently Asked Questions (FAQ)
The Ethernet connection is not working, what should I check? A: Ensure the Ethernet module is fully seated in its connector. Verify the cable and router/switch port are working. Check that your router’s DHCP is enabled. Does the PoE modu...
About SLZB-OS
1. About SLZB-OS 1.1 Overview SLZB-OS is the official firmware platform developed by SMLIGHT for its line of Zigbee and multi-radio Ethernet/USB/PoE adapters. It provides a web-based management interface that allows you to configure, monitor, and control...
Dashboard
2. Dashboard The Dashboard is the first screen you see when logging into SLZB-OS.It provides an at-a-glance overview of your device’s current status, connectivity, and Zigbee network health.From here, you can quickly access detailed sections via the top or si...
Mode
3. Mode The Mode page lets you choose how the coordinator is exposed to your smart‑home stack. 3.1 Radio SoC Modes Your SLZB device’s primary radio SoC can operate in different roles depending on your smart home network design: 1. Zigbee Coordinator Creates an...
About Zigbee Hub mode
4. About Zigbee Hub mode It is highly recommended to use U series coordinators for this mode (SLZB-06xU / MRxU / Ultima) Limitations: - no support for ZigBee devices that require a manufacturer code (Added starting from v3.4.3.dev3) - no support for ZGP and T...
Network
5. Network Settings The Network page in SLZB-OS manages how your device connects to your local network and, if required, to the internet.The available sections may vary depending on the selected Mode and hardware capabilities (Ethernet, Wi-Fi). 5.1 Infor...
Zigbee2MQTT / ZHA Settings
6. Zigbee2MQTT and ZHA Configuration The Z2M and ZHA page in SLZB-OS provides configuration tools for connecting your device’s Zigbee coordinator to an external server running either Zigbee2MQTT (Z2M) or Zigbee Home Automation (ZHA).It also contains advanced ...
Security
8. Security This page controls access to the SLZB‑OS web interface and the TCP “socket” that exposes the Zigbee coordinator to Z2M/ZHA. The options below are listed exactly as they appear. 8.1 Web‑server when socket is connected What it does: Controls w...
VPN
9. VPN (WireGuard) The VPN page in SLZB-OS contains a WireGuard settings helper, allowing the Zigbee coordinator to securely connect to your Home Assistant server or other remote endpoint. 9.1 WireGuard Overview WireGuard is a modern, highly secure VPN ...
DDNS
10. DDNS (Dynamic DNS) The DDNS page in SLZB-OS provides a helper to keep a public hostname updated with your device’s current public IP address. This is especially useful if your ISP changes your IP periodically and you want to access the coordinator remotel...
Scripts and Automations
11. Scripts and Automations The Scripts and Automations feature in SLZB-OS lets you create and run your own automation logic directly on the coordinator, without needing an external controller to send every command. Scripts can respond to events, toggle GPIOs...