Meet the SLZB-U2L USB-to-Ethernet Bridge: put Zigbee, Z-Wave, Thread, LoRa and 433 MHz dongles on LAN, Wi-Fi or PoE — with 2-to-1 USB aggregation, WireGuard, DDNS and OTA built in. Rolling out now.

Meet SMHUB Flasher — a free, cross-platform app (and CLI) that flashes or recovers your SMHUB over USB in about a minute and a half. It downloads the right firmware automatically, walks you through every step, and includes a recovery console to rescue an unbootable hub. Windows, macOS and Linux.

New firmware for the SLZB-U2L: U2L-Sharer turns it into a network USB server. Share a printer, a scanner, a Bluetooth adapter or almost any low-bandwidth USB device — and it shows up on a remote PC exactly as if it were plugged in there. Standard USB/IP, one-click on Windows.

Warning — power off first Before making any wiring connections, ensure the A-SLWF-11 and all power sources are completely powered off . This prevents electrical hazards and protects both the…

All of the following are integrated on a single compact board: Block Function Wi-Fi SoC ESP8266 , running WLED / ESPHome over 2.4 GHz Wi-Fi LED outputs Level-shifted Data and Clock lines at…

1) Connect to the device 1. Power the controller. On first boot it broadcasts a Wi-Fi access point named WLED-AP . 2. Join WLED-AP . 3. The captive portal opens automatically; otherwise browse to…

The A-SLWF-11 has a built-in infrared receiver , so you can control your lights with the supplied IR remote — handy when Wi-Fi or the app isn't convenient. The remote is a standard multi-function…

The A-SLWF-11 is a compact addressable-LED strip controller built around the ESP8266 Wi-Fi SoC and powered by WLED open-source firmware. It is designed for simple, reliable control of WS2812B-class…

Symptom Likely cause Fix No power / device dead Wrong voltage, loose or reversed wiring, bad adapter Verify supply, check connections, try another source/cable Powers on but LEDs dark Data/GND wiring…

Flashing over USB 1. Connect the controller to your computer with a USB-A to Type-C cable. 2. Open the SMLIGHT / WLED web-flasher in a Chromium-based browser and select the ESP8266 build. 3. Choose…

Warning Open the enclosure only when necessary. Power the device off first and work gently to avoid damaging the PCB or connectors. 1. Use a thin, sharp tool to release the cover, inserting it at the…

WLED / firmware GPIO map Function GPIO Notes LED Data output GPIO2 Primary data line LED Clock output GPIO12 Clocked strips only IR receiver GPIO4 Enable "IR" in WLED Push button GPIO0 Also used for…

Parameter Value Wi-Fi SoC ESP8266 Connectivity Wi-Fi 2.4 GHz LED outputs Data + Clock, 5 V logic level Supported strips WS2812B, WS2811, WS2813, WS2815, and clocked types Power inputs USB…

Developer-channel build: OTA crash-rollback, BLE proxy + Berry module for U-line/Ultima, PSRAM-by-default Berry scripts, RAM optimizations, plus crash-message and Zigbee Hub fixes.

Developer-channel build: firmware update channel selection, EFR32 NVM-clear option, stable-only auto-updates, plus DNS/OTA/Zigbee Hub fixes.

How a vibration sensor, AAA batteries, and SMLIGHT SLZB-06M Zigbee coordinator solved smart home gate automation in a radio dead zone — from a 1976 Land Cruiser.

A hands-on review of the SMHUB Nano Mg24 — setting up effortless remote Zigbee with Tailscale, Mosquitto and Zigbee2MQTT so your coordinator works from anywhere in the world.