Flashing and updating
There are two main modules in SLZB-06 that can be flashed and updated, these are:
- ESP32, which is responsible for all other operation of the device: connection to Ethernet and Wi-Fi, operation of additional systems such as LEDs. The current firmware of this module is available at the official SLZB-06 Firmware repository:open in new window;
- CC2652P, which controls the Zigbee network. It is flashed with Z-Stack 3.x.0 firmware available at the official Z-Stack 3.x.0 repository:open in new window.
Both ESP32 and CC2652P modules can be updated remotelly. You do not need to have physicall access to the device. Please read the next sections for updating both chips.