SLZB-06 as Zigbee router

How does router mode work?

SLZB-06 in router mode uses only a wireless connection to work with the Zigbee network (like a regular Zigbee device), so the device must be in the coverage area of ​​your main coordinator. You can still use WiFi/ETH to configure the device but not to connect to Z2M/ZHA.

Run SLZB-06 as a Zigbee router

1. Go to the SLZB-06's web interface.
2. Go to Mode and select the Zigbee Router mode in the Radiomodule mode menu.
3. Wait for the end of the firmware update.
4. To pair or re-pair, go to the web-interface, section Settings and Tools → General Settings and press Router reconnect button.