Netherlands flag

Internation

Change region

Order with International or Local delivery

Best picks for you:

  • There are no better offers

Filter by:

    usbSvg
    usbSvg
    usbSvg
    usbSvg
    usbSvg

    Smart begins here.

    Built for Smart Home Intelligence.

    SLZB-06

    Order with International or Local delivery

    Best picks for you:

    • There are no better offers

    Filter by:

      device
      SMLIGHT SLZB-06

      Zigbee Thread PoE Ethernet USB Adapter, CC2652P powered

      device

      • Zigbee & Matter-over-Thread

        Supports Zigbee and Matter-over-Thread, pre-flashed and ready to use out of the box.

      • Flexible connectivity

        Connect via Ethernet, Wi-Fi, or USB. Switch modes instantly via button or firmware.

      • Power-over-Ethernet (PoE)

        Skip extra cables—power your hub directly through Ethernet.

      • Home Assistant compatible

        Seamless integration with ZHA, Zigbee2MQTT, and other smart home platforms.

      • Boosted signal performance

        Equipped with +20 dB amplifier and +5 dBi antenna for strong, stable coverage.

      • Compact & distinctive

        Minimalist and original casing design fits discreetly into any interior.

      Freedom for Your Zigbee & Thread Stack with SLZB-06

      house
      house
      house

      With Ethernet-enabled SLZB-06 series coordinator, run Zigbee or Matter-over-Thread anywhere - without tying it to your smart-home (Home Assistant, openHAB, HomeSeer etc) server: remotely or even across buildings on different side of globe. One smart network, unlimited range.

      Gallery

      Private slide 1
      SLZB-06 in Kyiv
      Private slide 2
      SLZB-06 in Kyiv
      Private slide 3
      SLZB-06 in Kyiv
      Private slide 4
      SLZB-06 in Kyiv
      Private slide 5
      SLZB-06 in Kyiv
      Private slide 6
      SLZB-06 in Kyiv
      Private slide 7
      SLZB-06 in Kyiv
      Private slide 8
      SLZB-06 in Kyiv
      thumb 0
      thumb 1
      thumb 2
      thumb 3
      thumb 4
      thumb 5
      thumb 6
      thumb 7

      PRIVATE PHOTOS

      Private slide 1
      SLZB-06 in Hasselt, Belgium
      Private slide 2
      SLZB-06 in Vantaa, Finland
      Private slide 3
      SLZB-06 in Voluntari, Romania
      Private slide 4
      SLZB-06 in Helmond, Netherlands (Kingdom of the)
      Private slide 5
      SLZB-06 in Hennickendorf, Germany
      Private slide 6
      SLZB-06 in Oud-Beijerland, Netherlands (Kingdom of the)
      Private slide 7
      SLZB-06 in Sint Amandsberg, Belgium
      Private slide 8
      SLZB-06 in Berlin, Germany

      BUSINESS PHOTOS

      Business slide 1
      SLZB-06 in Mannheim
      Business slide 2
      SLZB-06 in Munich
      Business slide 3
      SLZB-06 in Munich
      Business slide 4
      SLZB-06 in Munich

      SLZB-OS

      powered

      FUNCTIONS

      lanorusb

      LAN or USB

      Use SLZB-06 as a Zigbee 3.0 or Thread adapter to LAN, Wi-Fi, or USB. Forget about separate devices. Change mode online or via button.

      poepower

      PoE power

      You can power your SLZB-06 device either through PoE or Type-C. PoE 802.3af 48V standard is supported.

      DataBase

      +20dB +5dB

      The Zigbee/Thread SLZB-06 adapter has a +20 dB amplifier on board and a +5 dB antenna. Cover your farthest locations.

      coordinator of router

      Zigbee or Thread

      Supports Zigbee 3.0 Coordinator, Router, or Matter-over-Thread modes. Mode change in one click.

      FIRMWARE

      PRE-FLASHED

      PRE-FLASHED�

      Just plug and play. You will get your SLZB-06 pre-flashed and ready to use.

      OPEN-SOURCE

      OPEN-SOURCE

      For security geeks, there is an open-source firmware version that covers core basic functionality.

      ADJUSTABLE

      ADJUSTABLE

      Full control of your device. Need to change mode from LAN to USB? Just one click. Want to turn off the power LED? One click!

      SECURE

      SECURE

      Control access to the Zigbee 3.0 SLZB-06 adapter�s settings through secure login and password.

      CHIPSETS AND TECHS

      CC2652P

      CC2652P�

      The Zigbee/Thread SoC is based on the powerful CC2652P chip from Texas Instruments - reliability confirmed by thousands of users.

      ESP32

      ESP32

      The powerful ESP32 chip (2 cores @ 240Mhz) handles all the functions of the device.

      LAN8720

      LAN8720

      A reliable Ethernet SoC from Microchip ensures a stable Ethernet connection.

      CP2102

      CP2102

      Best-in-class USB/UART SoC converter. Do not compromise on speed and quality.

      UPDATES

      REMOTE ZIGBEE UPD

      REMOTE ZIGBEE UPD

      The only Zigbee coordinator with the option to change modes Zigbee/Thread via web interface - just one click!

      REMOTE ESP32 UPD

      REMOTE ESP32 UPD

      ESP32 firmware can be updated remotely. Full control wherever you are!

      ESP32 AUTOBOOT

      ESP32 AUTOBOOT

      The only Zigbee coordinator with the option to change modes Zigbee/Thread via web interface - just one click!

      DIY PINOUTS

      DIY PINOUTS

      SLZB-06 is DIY-enthusiast friendly: it contains pinouts for both ESP32 and CC2652P chips.

      USER FRIENDLY

      EASY TO PLACE

      EASY TO PLACE

      Want to install it on the wall or under the table? Use double-sided adhesive tape or screws - SLZB-06 fits both!

      NEWBY MANUAL

      NEWBY? MANUAL!

      Don�t know how to start? No worries - an exhaustive manual is included!

      POWERFUL ANTENNA

      POWERFUL ANTENNA

      Need to cover a large area with your Zigbee network? No worries - a powerful antenna is included!

      TINY DESIGN

      TINY DESIGN

      Now you can place your adapter wherever you want! SLZB-06 is small and compact!

      OTHER

      4X LEDS

      4X LEDS

      Like visual responses from your devices? SLZB-06 has 4 LEDs for user interaction!

      BUTTON

      BUTTON

      Control device mode and other functions through the physical button.

      ROTATABLE ANTENNA

      ROTATABLE ANTENNA

      The rotatable, 3-dimensional antenna ensures the best positioning for the best signal.

      ENGINEERED IN UKRAINE

      ENGINEERED IN UKRAINE

      SLZB-06 is designed, developed, and tested in Ukraine. Ukrainian quality - guaranteed.

      Useful Resourses

      Featured today:

      Zigbee+Bluetooth hub on SLZB-06
      Zigbee+Bluetooth hub on SLZB-06

      Zigbee+Bluetooth hub on SLZB-06 - here

      160+ Zigbee devices
      160+ Zigbee devices

      160+ Zigbee devices - here

      Two or more coordinators with one Home Assistant
      Two or more coordinators with one Home Assistant

      Two or more coordinators with one Home Assistant - here

      3D print mount holders designs SLZB Series
      3D print mount holders designs SLZB Series

      3D print mount holders designs SLZB Series - here

      Fixing my Zigbee with a network Zigbee coordinator
      Fixing my Zigbee with a network Zigbee coordinator

      Fixing my Zigbee with a network Zigbee coordinator - here

      Find more:

      SLZB-06 Matter-over-Thread - Youtube guide- here

      Matter-over-Thread on SLZB-06M- here

      Zigbee+Bluetooth hub on SLZB-06- here

      160+ Zigbee devices- here

      Multiple coordinators with one HA- here

      Two or more coordinators with one Home Assist... - here

      Real feedback- here

      Link remote SLZB-06 via VPN to you Home Assis... - here

      SLZB-OS changelog- here

      3D print mount holders designs SLZB Series- here

      Best Zigbee Coordinator - independent review- here

      Fixing my Zigbee with a network Zigbee coordi... - here

      Official Web Flasher SLZB-06 and MR Series- here

      SMLIGHT SLZB Home Assistant Official integrat... - here

      Electrical Diagram SLZB device
      Electrical Diagram SLZB device

      PACKAGE DEVICE

      Package device slzb06
      Package device slzb06
      deviceantena for device
      wrench
      screwscrew
      scotchscotch
      ruler

      Specifications

      Hardware

      • Radio chip: CC2652P Texas Instruments
      • Core chip: ESP32-D0WD Espressif
      • USB/UART: CP2102N Silicon Labs
      • Ethernet: LAN8720 Microchip
      • Antenna: L-I-shaped +5dB Baishi

      Power / Data

      • Type-C: Yes
      • Power-over-Ethernet (PoE): Yes
      • PoE standard Supported: IEEE 802.3af (48V)
      • Energy consumption: 1.5–3W

      Device mode

      • Zigbee coordinator Z2M/ZHA: Yes
      • Zigbee router: Yes
      • Matter-over-Thread router: Yes
      • Standalone Zigbee Hub: Yes
      • Zigbee/Thread to Ethernet: Yes
      • Zigbee/Thread to USB: Yes
      • Zigbee/Thread to Wi-Fi: Available

      Compatibility

      • Zigbee2MQTT native support: Yes
      • ZHA native support: Yes
      • Pre-flashed: Yes
      • Ethernet support: Yes, 10/100Mb
      • Wi-Fi support: Yes, 2.4GHz
      • Bluetooth ready: Yes
      • SLZB-OS compatible: Yes
      • Home Assistant integration: Yes

      Features

      • External 5dB antenna: Yes
      • Internal Wi-Fi / Bluetooth antenna: Yes
      • Radio SoC output gain: up to +20dB
      • ESP32 Flasher integrated: Yes
      • ESP32 Autoboot: Yes, through DTR/RTS
      • Status LEDs: Yes, 4
      • Button for control: Yes

      Dimensions and weight

      • Adapter: 160x24x28mm, 86g
      • Antenna: 192x12x12mm, 15g
      • Packing (full): 180x25x40mm, 105g

      Operating environment

      • Temperature: +5 – +35°C
      • Humidity: < 60%

      Order with International or Local delivery

      Best picks for you:

      • There are no better offers

      Filter by:

        Instant Answers to Common Questions

        This FAQ applies to all devices in the SLZB-06x/MRx series, including SLZB-06, SLZB-06M, SLZB-06P7, SLZB-06P10, SLZB-06Mg24, SLZB-06Mg26, SLZB-4G, SLZB-MR1, SLZB-MR2 and SLZB-MR3. For simplicity, we refer to them collectively as SLZB-06x/MRx series devices throughout this section.

        SLZB-06x/MRx series devices are smart home adapters that act as a bridge between your Zigbee or Thread devices and your smart home system, like Home Assistant. Think of them as the middleman that helps your smart lights, sensors, switches, and other devices talk to your smart home hub.
        They support various connection options like Ethernet, USB, Wi-Fi, and PoE, and come pre-configured and ready to use. Whether you want to control your devices locally, remotely, or even without a separate smart home server these adapters offer a reliable, flexible way to build and expand your smart home.
        Yes, SLZB-06 series devices are fully compatible with Home Assistant and work out of the box.
        They come pre-flashed and tested, so you don’t need to worry about manual firmware installation.
        Depending on the firmware variant, each device can function as a Zigbee coordinator, Zigbee router, or Matter-over-Thread device.
        They support both ZHA and Zigbee2MQTT integrations, and can be connected via Ethernet or USB.
        Home Assistant will detect them automatically after connection.
        SLZB-06x/MRx series devices can operate in several flexible modes, depending on your use case and the installed firmware. Supported modes include:
        • Zigbee Coordinator – for managing a Zigbee network via ZHA or Zigbee2MQTT.
        • Zigbee Router – to extend the range of an existing Zigbee network.
        • Matter-over-Thread Border Router – to control your Matter devices over Thread network.
        • Zigbee Hub Mode – direct control of Zigbee devices via built-in web interface (available only on TI-based models like SLZB-06, 06P7, 06P10).
        You can switch between modes through the web interface one-click action.
        Yes, it is possible to use multiple SLZB-06x/MRx series coordinators with a single Home Assistant instance, but this requires a more advanced setup. Specifically, you must run multiple independent Zigbee2MQTT instances, each connected to a separate SLZB-06x/MRx series device. This configuration allows you to manage separate Zigbee networks in parallel - useful for multi-location coverage, performance isolation, or testing different configurations. Learn more in our guide: Multiple Adapter Setup.
        SLZB-06x/MRx series devices support both Power over Ethernet (PoE) and USB Type-C power options. You can choose the one that fits your setup best. PoE enables a clean, single-cable installation with both data and power over Ethernet. Alternatively, if PoE is not available, simply power the device via a regular USB Type-C adapter.
        You don’t need to change or configure anything when switching power sources. SLZB-06x/MRx series devices can be powered from either PoE (Power over Ethernet) or USB Type-C, and both can even be connected at the same time. Thanks to optoelectronic isolation, each power source is safely separated and protected from the other, ensuring reliable operation regardless of how you power the device.
        You can update both the Core chip and the Zigbee/Radio chip with just one click. There are two options:
        • Via the device’s built-in web interface one-click feature;
        • For Home Assistant users, directly via the official SMLIGHT SLZB integration.

        No cables, no tools, no manual flashing - quick and reliable updates in seconds.
        Yes, SLZB-06x/MRx series devices can work as Zigbee-to-Wi-Fi adapters. When running in Wi-Fi mode, the device connects wirelessly to your network while acting as a Zigbee coordinator (via ZHA or Zigbee2MQTT).
        However, keep in mind that Wi-Fi, Zigbee, and Thread all operate in the 2.4 GHz band, which can lead to signal interference. While the setup is fully supported and functional, we recommend careful channel planning and proper placement to avoid wireless conflicts and ensure stable performance.
        Yes, you can. SLZB-06x/MRx series devices support a feature called Zigbee Hub mode, which allows direct control and monitoring of Zigbee devices through the built-in web interface - no need for Home Assistant or any external smart home server.
        However, please note that Zigbee Hub mode is available only on devices based on TI Zigbee chips, such as SLZB-06, SLZB-06P7, and SLZB-06P10. This mode is ideal for small setups where you need basic control (e.g. switching devices, viewing sensors) without full automation. For advanced use cases, Home Assistant or Zigbee2MQTT integration is recommended.
        Yes, SLZB-06x/MRx series devices can function as Matter-over-Thread border routers, allowing you to integrate Thread-based Matter devices into your smart home setup. This enables secure, low-power, and reliable communication over Thread.
        Yes, SLZB-06x/MRx series devices can function as Bluetooth Low Energy (BLE) proxy devices for Home Assistant. This allows them to relay BLE signals (e.g. from temperature or presence sensors) to Home Assistant over the network, extending Bluetooth coverage in your home.
        To use this feature, you need to flash a special ESPHome-based Bluetooth Proxy firmware. This can be done directly from the built-in SLZB-OS web interface. However, please note that doing so will replace SLZB-OS, and the device will no longer function as a Zigbee or Thread adapter until SLZB-OS is flashed back - which can also be done at any time via the same web interface.
        SLZB-OS is the official operating system developed by SMLIGHT for the SLZB-06x/MRx series devices. It runs on the Core SoC and provides:
        • A built-in web interface for setup, configuration, and one-click firmware updates
        • Support for Zigbee Coordinator, Router, Zigbee Hub Mode, and Matter-over-Thread roles
        • Integration with Home Assistant via ZHA, Zigbee2MQTT, or SMLIGHT’s native integration
        • Optional features like PoE control, debug logging, and hardware diagnostics
        SLZB-OS is preinstalled and tested on all devices out of the box, so you can get started immediately - no flashing required. It’s also easy to reflash later if you try other firmware like ESPHome or other Community builds and want to return to full functionality.
        Yes, you can. SLZB-06x/MRx series devices are fully compatible with community-driven open-source firmware for both the Zigbee radio (e.g. Zigbee coordinator firmware for TI or Silicon Labs chips) and the ESP32 core (e.g. ESPHome, Tasmota, or custom ESP32 apps).
        Additionally, SMLIGHT provides an official open-source firmware for the core, which serves as a lightweight alternative to SLZB-OS. While it doesn’t offer the full feature set and polish of SLZB-OS, it’s a great starting point for customization and community contributions.